This a sample private label article from the bath plr article package.

For those that are in dire need of repairing their bath or just a leak in it, there is help at hand, as the hardware and interior decorators alike are promoting methods and care that you can manage on your own without having to resort to incurring the expense of calling in professionals. One thing to keep in mind before repairing scratches in the bath is that the strong, abrasive content of most bath cleaners can harm the acrylic surface of the average bath, so do take care to buy one that is high quality and is specially formulated for the type of bath you have.
Common problems calling for bath repair
If the problem your bath suffers from is scratches on it, then it is advisable to buy a cleaner specially meant for it. The polishing paste is one that removes lime deposits, discoloration and heavy soiling and takes out the scratches at the same time. The good cleaners do not leave a smell behind so do not sting on the dollars if you don’t want your bath to be reeking of an unpleasant odor. The cleaning up process for acrylic baths is simple and all one has to do is shake the tube before applying and spread it with a soft, moist cloth/sponge and then rinse off with warm water. For plastic baths however, that need resurfacing, there are kits available in the market that add to the durability of the bath and repair it well. These are mostly two-part epoxy based coatings for renovating bath and work well on discolored or badly stained surfaces and save you money and time instead of going in for a replacement.
Bath repair can be a simple job
There are refinishing kits available in the market today that help you achieve almost professional results. For enamel baths, there are kits, which only require you to clean and sand the bath until the enamel surface is rough. Then you need to remove the dust and apply the base of replacement according to the instructions given in the kit and finish it off with lacquer evenly on the surface. The availability of different colors in these repair kits ensures that no bath is left out crying for repairs.

This a sample private label article from the bath plr article package.

Good repairing job on a bath tub has to be very glossy, smooth to the touch, and have a uniform appearance just like a new bathtub. One will never be able to duplicate the glossy finish unless the person is a professional, and feel professional refinishing gives your bathtub. Repairing of a bath tub comprise of many of the same skills and materials used by professional auto body craftsmen. Quality work needs extensive preparation, use of special cleaners, bonding primers, fillers for cracks and chips, and the skill and experience to spray on fast drying acrylic coatings. One cannot get good results from a spray can or epoxy kit, nor can one get the warranted durability by a miracle method refinisher offers.

More about the bath tub repair

If one is thinking about buying a porcelain repair kit from the local hardware store, one should consider the following. The kits proffer a limited choice of colors. Other method can proffer an unlimited number of colors. Even white is very difficult to match with original white color. Most kits generally contain epoxy coatings, which are old technology. Epoxy is very durable and comfortable enough to use at home also, but does not have the same gloss or uniform appearance as do acrylic coatings. Epoxy gets dried very slowly and gradually. Multiple coats will be required for the meaning that several days may be necessary to complete a bath tub repairing project. Over time, epoxy can make the substance and the mixture yellow or can also become chalky in appearance.

Conclusion

Kits available at the market only gives the chemicals. One is required to get the equipment, tools, and personal safety equipment including chemical resistant gloves, respirators, exhaust fans, eye protection and the paint suits. A finish is applied with a brush or roller will be uneven and to give a painted look. A glossy, smooth finish can only be achieved though the use of a fine finish high volume, low pressure sprays equipment. Some of the kits at the market are only intended for repairs and not complete refinishing jobs. Some kits contain cans of spray paint which simply camouflage the problem and will rarely last any length of time without the use of a bonding agent. Many kits provided at the market are plainly state that it will take three days or more before you can use your tub.

This a sample private label article from the plumbing plr article package.

This a sample private label article from the Ceramic Tiles plr article package.

As ceramic tiles are manufactured with care, these tiles could provide you some problem. It may happen that your tile is in great condition, except for a few minor imperfections. These may be aside of by Repairing or replacing, the individual problem area is much easier than replacing your entire floor. With these helpful repair tips, you can make your tile floor look brand new again. These repair techniques can be used on vinyl tiles, vinyl sheet for floor covering or linoleum.

After using tiles for so many years, you might encounter many problems with your tile floor. Some of the tips could solve this problem, for the purpose to execute, tools and material are needed. Tools and material which will help us in this are Tinfoil, Clothes Iron, Putty Knife, Floor covering adhesive, Mineral spirit, Scrap wood and 2 buckets (for weighing down)

Repairing process: Flattening a Curled Tile

In order to start with the repairing process,

Step 1. Pull up the Tile Corner and Cover the curled tile with a piece of tinfoil and place a warm clothes iron, set it on medium heat, (The tinfoil helps prevent damage and discoloration from the heat.) Once the tile is pliable, lift the curled corner with a putty knife, scrap the old adhesive off the tile corner and exposed floor underneath the tile.

Step 2. Apply Adhesive: Apply adhesive to the underside of the exposed corner of the tile and press the corner firmly into place. Use mineral spirits to wipe off any of excess adhesive.

Step 3. Weigh the Tile Down: Once the tile is in place, weigh it down with 2 buckets of water until the tile has set. Place scrap wood pieces underneath the buckets to distribute the weight evenly over the tile. Follow

Replacing a Damaged Tile:

Step 1. Remove the Tile: Place a tinfoil over the damaged tile and press a warm iron on the tinfoil until the damaged tile is pliable. Cut into the center of the tile with a utility knife and pry up the tile from the center cut using a putty knife.

Step 2. Scrape Away Old Adhesive: Apply any mineral spirits to the floor that was under the damaged tile and, using a putty knife, scrape away the old floor-covering adhesive.

Step 3. Replace With New Tile: Using a clothes iron, warm the new tile, that has been covered with a sheet of tinfoil. (This avoids discoloration.) Once the tile is flexible, apply adhesive to the floor with a notched trowel and drop the tile into place. Press the tile down firmly and wipe away any seeping adhesive with mineral spirits. Use scrap wood under buckets of water to weigh the tile down until it dries.