57 Ceramic Tile Articles With Private Label Rights

Just $7

Here is the List of Article Topics included within this package…

Crystal Clear Upfront Disclosure About The Quality of These Articles Before You Purchase!

I paid ghostwriters $5 per article so this package consisting of 57 articles cost me $285 however while they are okay the quality is not what I was hoping for hence the reason why you get the entire collection for just $7.

The quality of the articles work fine for website content, excellent blogging material and they are excellent for making money from adsense. However if you wanted to create an ebook or special report they would need major reworking. View the sample article below to make sure it meets your needs before purchasing…

Example Private Label Article Found In This Package

——————————— Start Sample ———————————————-

How to grout ceramic tiles:

As soon as the tile adhesive is dry you can grout the tile. There are two unusual types of grout, namely, sanded and non-sanded grout. Sanded grout has sand added for potency. It is used for the joints wider than 1/16 inch, like superior tile on floors. Non-sanded grout is generally mixed with a latex additive to make it stronger and more workable. It is used for joints less than 1/16 inch wide, like for minor wall and countertop tiles. The color of the grout you choose largely greatly affects the look of the tile. By means of a white or a light colored grout highlights as the color in tile. By means of a light grout with a light tile is good for hiding any mistakes you've made in setting the tile. One should never use a light-colored grout on floors where we get a lot of outdoor traffic as it does not stay that way for long. Choosing a dark grout with a light tile, or light grout with a dark tile will highlight the geometric pattern of your layout. Gray is a good neutral color and it wears fine on floors. It also looks good with natural-looking tiles akin to terra cotta. Before you go wild with a colored grout, check it in a small area first.

Applying Grout:

Mix the grout according to the directions by means of a latex additive. Use a padded grout float to extend the grout over a workable section of tile. Push the grout diagonally athwart the joints to force it down into the gaps. Grout all the joints except for those that you need to allow for expansion joints. These would be along fixtures, flanked by the floor and walls, or joints in corners in between walls. These will get potted with caulk later. Once the joints are packed with grout, scrap the surplus grout off the surface of the tile with the grout float.

Cleaning Off Tile:

Clean up the surplus grout with a damp sponge and a couple buckets of clean water. First, wipe as much of the grout as you can off the outside of the tiles using circular strokes. Keep rinsing the dab so it stays clean. Once the tile surface is clean, make another pass equivalent to the grout lines. This is to figure the grout lines in the joints. If you need, smooth the grout down a little below the surface of the tile. After a while a small haze will form on the top of the tiles. This can be cleaned off with a dab or a soft rag.

——————————— End Sample ———————————————-

WARNING! These Articles Are Strictly For Your Own Personal Use ONLY!

You can use these articles for your own content however under NO CIRCUMSTANCES can you resell these articles to others. These articles can only be purchased from myself and are only available from my site.

Instant Download After Purchase
Order Now For Just $7 …

P.S. Remember this packages consists of $285 worth of ghost written articles and you get them all for just $7